Riboflavin Coverage Test
CIP systems are used in the pharmaceutical industry to clean one or more vessels in the manufacturing process.
December 1, 2020
Key Takeaways:
- The riboflavin coverage test is a visual method to assess spray device effectiveness in clean-in-place (CIP) systems by detecting fluorescent residues under UV light.
- The test involves coating the vessel with a riboflavin solution, rinsing and inspecting under UV light, with any remaining fluorescence indicating inadequate spray coverage.
- Inadequate coverage can be corrected by repositioning or adding spray devices, and the test should be repeated until 100% coverage is achieved.
- Riboflavin is ideal for this application due to its strong fluorescence and safety profile, making it a reliable indicator for cleaning validation.
- This test supports equipment design verification and cleaning validation, ensuring that all internal surfaces receive adequate cleaning action during CIP cycles.
CIP systems are used in the pharmaceutical industry to clean one or more vessels in the manufacturing process. Spray devices are internally installed in vessels to ensure the CIP system can properly clean all areas of the tank. During the cleaning cycle, spray devices disperse cleaning solution and provide physical action to remove residues inside equipment.
Spray devices must deliver adequate tank coverage for a complete clean. One method to determine coverage is to perform a riboflavin coverage test. Riboflavin, a type of vitamin B found in food, is selected for vessel coverage studies due to its fluorescent properties under ultraviolet light.
Suggested Content
Article
A Risk-Based Approach to Stainless Steel Equipment Maintenance
Laboratory tests can determine critical cleaning parameters for passivation treatments used to prevent rouge on GMP stainless-steel equipment.
Article
Validation for Automated Washing Systems
Discover why a cleaning lifecycle approach emphasizes design and monitoring over validation with our article in this PDA Letter. In the latest issue of the PDA Letter, experts from our Life Sciences Division discuss best practices within the 3-stage process.
Article
Visual Inspection Practices of Cleaned Equipment
Regulatory and compendial guidelines require that manufacturers confirm process equipment is visually clean following a cleaning operation. Recently, a STERIS survey showed that visual inspection practices for cleaned equipment differ among manufacturers.
Join our email list for the latest industry news and product updates.
By clicking Subscribe you're confirming that you agree with our Terms and Conditions.